dub-us.com

This is a continuation of lawn mower repair, carburetor removal. If you have drained the fuel and have closed the shutoff valve, you may want to remove the air filter as well. To loosen two screws, you need to use a large Philips screwdriver. You can reuse the gasket if it separates easily and cleanly though a dab of non hardening sealer is recommended after you have tested your lawn mower. This has to be done to be able to make sure that your newly restored carburetor works properly. Any torn, worn or damaged parts should be replaced with a new one. An open end wrench may be used and may be helpful if the bolts are really tightened, but the thing is the common sockets may not fit around the bottom bolt although thin walled sockets may work. You may now disconnect the throttle linkage and governor spring and the rubber tube from the primer bulb. Disconnect the speed control and also the stop switch wire as well.

Comments are closed.